Foundation & Ground Improvement
For soil stabilization and ground improvement.
- Reach depths up to approximately 52 ft without casing.
- Reduce foundation preparation time by up to 50%.
- Mix soil on site to help reduce CO₂ emissions.
- Reduce backfilling through in-situ stabilization.
- Switch between mixing and milling easily.
- Reduce reliance on pile breakers with precision milling.
Modern foundation work demands high accuracy, soil-specific adaptability, and environmentally responsible solutions. Whether stabilizing weak soils, building earth-concrete walls, or profiling pile caps, Kemsolid attachments deliver consistent performance across a wide range of excavation and soil mixing tasks.
Kemsolid, powered by KEMROC, offers advanced cutting and mixing solutions for creating soil-cement structures, improving bearing capacity, and executing low-vibration foundation preparation in even the most challenging environments.
From shallow trench excavation to deep in-situ mixing, Kemsolid attachments give contractors the power to reduce overbreak, limit material waste, and increase productivity, while supporting carbon-reducing alternatives to traditional excavation and backfilling.
Why Choose Kemsolid Foundation
Engineered for Ground Improvement and Soil Stabilization
With Trench-Soil Mixing (TSM) and Mass-Soil Mixing (MSM), Kemsolid technologies help transform soft or fluid soils into load-bearing foundations with reduced excavation.
Compatible with Diaphragm Wall Construction
Using Kemsolid KSI attachments, contractors can create continuous soil-cement barriers directly in situ, reducing the need for segmented casting and heavy lifting equipment.
Ideal for Pile Cap and Pile Head Cropping
Kemsolid KRX Rotary Drives enable precise milling and breaking of pile caps and pile heads, helping save time and reduce overcutting compared with traditional breakers.
Compact, Low-Vibration Operation for Urban Projects
Kemsolid attachments operate with minimal vibration, making them well suited for foundation work in densely built environments where structural safety is a key concern.
More Sustainable and Efficient
By reducing excavation needs, Kemsolid in-situ mixing attachments can help cut CO₂ emissions by up to 40% and reduce soil disposal costs.
Cement binder is injected directly into the soil to create clean, continuous foundation structures.
KSI Trench-Soil Mixing systems can achieve mixing depths from approximately 13 ft to 52 ft.
Interchangeable tool heads support milling, drilling, and mixing tasks.
In-situ mixing helps reduce material hauling, backfilling, and soil disposal by stabilizing soil directly on site.
Well suited for treating pile heads and trench walls with controlled milling performance.
Mass-Soil Mixing shafts can reach depths of up to approximately 20 ft.
MSM units are designed for unstable ground conditions and soft to fluid soils.
Uniform binder distribution supports long-term soil performance.
Quiet, compact foundation solutions suitable for urban job sites and space-limited environments.
Please select your area of application:
Main Applications
Soil-Cement / Earth-Concrete Walls
Create vertical cut-off or load-bearing walls with Kemsolid KSI Soil Mixing Attachments, without using segments or precast panels.
Soil Stabilization and Ground Improvement
Improve soil performance beneath roads, embankments, or structures by mixing binder in situ, strengthening weak subgrades.
Trench and Narrow Foundation Preparation
Kemsolid KRX and KRD attachments support the profiling of narrow trenches or pile rows, even in congested urban conditions.
Pile Cap Cropping and Bored Pile Head Milling
Use Rotary Drives to remove pile caps and mill bored pile heads cleanly, reducing rework and helping reduce vibration impact on adjacent piles.
Recommended Kemsolid Attachments for Foundation Work
-
KSI Soil Mixing Attachments
Kemsolid KSI Range – Soil Mixing AttachmentsMeasure:Applicaitons- For Trench-Soil Mixing (TSM), earth-concrete walls, and soil-cement structures
- Works with excavators from 35 tons and pilling rig
3 modelsDetails -
KRD range
Kemsolid KRD MIX Range – Mass Soil Mixing CuttersMeasure:Applications:- Used in soft and fluid soils
- Achieves mixing depths up to 6 or more meters
11 modelsDetails -
KRX Powertool drives
Kemsolid KRX Range – Power Technology DrivesMeasure:Applications- Supports pile cap removal, trench profiling, and shallow drilling
- Offers high torque, multi-purpose rotary cutting
12 modelsDetails
Traditional Methods vs. Kemsolid Attachments
| Feature | Traditional Excavation & Breakers | Kemsolid Attachments |
| Soil Stabilization | Requires excavation and backfilling | In-situ binder mixing |
| Earth-Concrete Wall Construction | Segment casting + crane lifting | Continuous in-situ wall |
| Pile Cap Removal | Hydraulic breaker (no control) | Precision milling with rotary drive |
| Urban Suitability | Noisy and high vibration | Low-noise, low vibration |
| Environmental Impact | High CO₂ and material waste | Up to 40% CO₂ reduction |
- Increase soil bearing capacity by 2x
- Avoid settlement with soil-cement columns
- Finish foundation works with less rework
- Strengthen foundations under existing structures
- Stabilize fluid soils for deep construction
FAQs About Foundation Work with Kemsolid
-
How deep can Kemsolid mix soil for foundation stabilization?
Kemsolid KSI attachments can reach mixing depths from approximately 13 ft to 52 ft, while KRD MIX technologies can reach depths of up to approximately 20 ft for Mass-Soil Mixing.
-
Can I use Kemsolid attachments for earth-concrete wall construction?
Yes. The KSI range creates continuous earth-concrete walls using in-situ mixing, with no precast segments required.
-
Are these attachments suitable for pile cap or pile head removal?
Yes. KRX Rotary Drives can precisely mill pile caps or treat pile heads with low vibration and reduced risk.
-
What soil types are compatible with Kemsolid soil mixing?
Kemsolid technologies are effective in soft to fluid soils, including clay, loam, and silt, as well as mixed or unstable ground.
-
Can I reduce excavation volume using these technologies?
Yes. In-situ stabilization helps reduce the need to excavate, haul, and dispose of soil, reducing environmental and logistical costs.
We are here to help! Fill out the form and our team will be happy to assist you with any questions or needs you have regarding our solutions. Whether you require detailed information, technical support, or a personalized quote, we're committed to providing the support you need to achieve success in your projects.
